Real Life Adventures by Gary Wise and Lance Aldrich for August 03, 2021

  1. Mm wp001
    allen@home  over 2 years ago

    I’m not sure about newer machines. Older ones if it stops working it’s usually the timer. And those suckers are expensive.

     •  Reply
  2. Coyote
    eromlig  over 2 years ago

    Occasionally something breaks around here, and I fuss with it, slap it, bang it against a wall… and it starts to work correctly. When my wife asks me how I was able to fix it, I reply, “Gee, Honey; it was pretty technical — I’m not sure I could explain it to you.” [Yes, she’s figured out that’s code for “I have no freaking clue.”]

     •  Reply
  3. Don martin 1
    Farside99  over 2 years ago

    Washers I can do. Dryers I can do. Plumbing I can do. Refrigerators, not so much.

     •  Reply
  4. 704fe3d1 4a7d 495f a742 2d8456861f60
    admiree2  over 2 years ago

    YouTube has saved me an estimated $500+ in labor costs this summer. I never trusted my mechanical skills but the labor shortage and gouging estimates (when you can find someone for a small job) forced me into it.

    An experienced person could do the jobs in less than half the time that it took me to do but each experience has some knowledge gained that is transferable.

    Next task is the flashing around the chimney that the guy hired last year screwed up. My wife is not thrilled that I will be on the roof but I believe I can still handle it although I am not telling her that I will be hesitant.

    Still not to the point of messing with anything regarding the electrical system…with or without YouTube.

     •  Reply
  5. Missing large
    Doug K  over 2 years ago

    What to do? … Call someone to try to get it fixed?

    … or see if someone has a cheap used one (that works)?

    … or just go out and buy new one?

    … wait a week and see if it will “fix itself”?

     •  Reply
  6. Missing large
    mommavamp  over 2 years ago

    “What’s wrong with it?” Answer—“Sledgehammer.”

     •  Reply
  7. Gameguy49
    Gameguy49 Premium Member over 2 years ago

    The most frequent cause of problems with washers is the safety shut-off when you lift the lid. They are inexpensive and easy to replace.

     •  Reply
  8. Thumbnail img 0108
    Jeffin Premium Member over 2 years ago

    Dirt in the mud valve? Cecil valve quit ceciling?

     •  Reply
  9. Thumbnail img 0108
    Jeffin Premium Member over 2 years ago

    Might need some relative bearing grease?

     •  Reply
  10. 704fe3d1 4a7d 495f a742 2d8456861f60
    admiree2  over 2 years ago

    Brush up on your McGyver episodes.

     •  Reply
  11. Missing large
    davanden  over 2 years ago

    What difference does it make? If it doesn’t work, it doesn’t. You have to get it fixed.

     •  Reply
  12. Missing large
    Bill The Nuke  over 2 years ago

    I enjoy fixing things until it becomes an endless chore. Then it’s time for new appliances.

     •  Reply
  13. Bearfront
    paranormal  over 2 years ago

    That’s what repair companies are counting on.

     •  Reply
  14. The rat
    Ratkin  over 2 years ago

    Our fence on one side had to come down because our new next door neighbor is building a house. We had a small unwanted volunteer tree growing right on the fence line into and over the old fence so it had to come down. It was too big to cut down with a hand saw, especially with my arthritis, so I popped for a reciprocating saw. It was expensive, but the general rule is if you buy the tool and use it only once, it’s still cheaper than hiring someone, and you have the tool for next time.

     •  Reply
  15. Copy of msg apa181
    The Brooklyn Accent  over 2 years ago

    Sattinger’s Law: It works better if you plug it in.

     •  Reply
  16. Missing large
    rAtkinson  over 2 years ago

    I work at Home-po. Easy fix , disconnect, unplug , and put on curb. I think we have one on sale.

     •  Reply
  17. Picture
    JesseLouisMartinez  over 2 years ago

    A real handyman

     •  Reply
Sign in to comment

More From Real Life Adventures